NEW!

NEW COLOUR!

Inherently flame resistant material that is wind and waterproof with breathability. The material is certified according to: EN ISO 11611, EN ISO 11612, EN ISO 1149, EN 61482-1-2, EN 61482-1-1, EN ISO 20471, EN 13034, EN 343.

Evaluated according to EN ISO 11612, inherent flame protection, elastic.

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1514 is a flame resistant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN  IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1516 is a flame resistant fabric, carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Comfortable and stretchy rib quality, with inherent flame resistant properties. Fabric is certified for EN 11612 A1, B1, C1, EN 1149-3, EN IEC 61482-1-1 Ebt: 8,2 cal/cm² ELIM: 7,3 cal/cm², EN IEC 61482-1-2, APC 1.

A knitted material with inherent flame resistant features. It's an interlock that is soft and comfortable to wear. The fabric is certified for EN ISO 20471, EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Comfortable and warm wool quality in a knitted interlock with inherent flame resistant properties. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Flame retardant fabric. High proportion of cotton provides clothes that are comfortable to wear. Certified  EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11612. 

Flame resistant hood for shell jacket 4053, 4066 and 4446, featuring reflective details for increased visibility. Completely metal-free and attaches with plastic press studs.
<ul>
<li>Size S fits model 4053, 4066 and 4446 in sizes XS–S</li>
<li>Size L fits model 4053, 4066 and 4446 in sizes M–XL</li>
<li>Size 2XL fits model 4053, 4066 and 4446 in sizes 2XL–4XL</li>
</ul>

Hood Inherent

Welding glove developed for TIG welding, where precision, control and flexibility are essential. The goat leather palm gives a soft, supple feel and very good dexterity, while the reinforcement on the little finger side in cow split leather provides extra protection where wear is often greatest. 
The extended split leather cuff protects further up over the wrist, and heat-resistant Kevlar seams contribute to a construction that stands up to demanding work. A welding glove that combines protection, durability and the control TIG work demands. 
The Supreme Heat series consists of welding gloves made from carefully selected materials of the highest quality and durability, with a focus on safety.
<ul>
<li>Suitable for TIG welding</li>
<li>Goat leather palm</li>
<li>Reinforcement on the little finger side in cow split leather</li>
<li>Extended split leather cuff</li>
<li>Heat-resistant Kevlar seams</li>
</ul>

Welding Glove Supreme Heat TIG

Half-lined welding glove developed for MIG welding, where safety, control and flexibility are essential. The buffalo leather palm gives a soft, supple feel and good dexterity, while reinforcements at the thumb crotch and little finger side in cow split leather provide extra protection where wear is often greatest. 
The extended split leather cuff protects further up over the wrist, and heat-resistant Kevlar seams contribute to a construction that stands up to demanding work. The half lining is positioned to cover the back of the hand, creating a heat-protective upper side. All this results in a welding glove that combines protection, durability and the control MIG welding demands. 
The Supreme Heat series consists of welding gloves made from carefully selected materials of the highest quality and durability, with a focus on safety.
<ul>
<li>Suitable for MIG welding</li>
<li>Buffalo leather palm</li>
<li>Backhand in cow split leather</li>
<li>Heat-protective lining over the backhand</li>
<li>Thumb crotch reinforcement in cow split leather</li>
<li>Reinforcement on the little finger side in cow split leather</li>
<li>Extended split leather cuff</li>
<li>Heat-resistant Kevlar seams</li>
</ul>

Welding Glove Supreme Heat MIG

Fully lined welding and heat-protection glove developed for MAG welding, where safety, control and flexibility are essential. The buffalo leather palm gives a soft and comfortable glove, while reinforcements at the thumb crotch, palm and little finger side in cow split leather provide extra protection where wear is often greatest. 
The extended split leather cuff protects further up over the wrist, and heat-resistant Kevlar seams contribute to a construction that stands up to demanding work. The glove has a lined hand with extra heat protection on the back of the hand. All this results in a welding glove that combines protection, durability and the control MAG welding demands. 
The Supreme Heat series consists of welding gloves made from carefully selected materials of the highest quality and durability, with a focus on safety.
<ul>
<li>Suitable for MAG welding</li>
<li>Buffalo leather palm</li>
<li>Backhand in cow split leather</li>
<li>Fully lined with extra heat protection over the backhand</li>
<li>Reinforcement on the little finger side, thumb crotch and palm in cow split leather</li>
<li>Extended split leather cuff</li>
<li>Heat-resistant Kevlar seams</li>
</ul>

Welding & Heat Protection Glove Supreme Heat MAG

Fully lined welding glove with cut protection level D, 360° around the hand, developed for MAG welding where safety through heat protection and cut protection, control and flexibility are essential. The buffalo leather palm gives a soft and comfortable glove, while reinforcements at the thumb crotch, palm and little finger side in cow split leather provide extra protection where wear is often greatest. 
The extended split leather cuff protects further up over the wrist, and heat-resistant Kevlar seams contribute to a construction that stands up to demanding work. The result is a welding glove that combines protection, durability and the control MAG welding demands. 
The Supreme Heat series consists of welding gloves made from carefully selected materials of the highest quality and durability, with a focus on safety.
<ul>
<li>Suitable for MAG welding</li>
<li>Cut protection level D, 360° around the hand</li>
<li>Backhand in cow split leather</li>
<li>Heat protection on the upper side of the glove</li>
<li>Reinforcement on the little finger side, thumb crotch and palm in cow split leather</li>
<li>Extended split leather cuff</li>
<li>Heat-resistant Kevlar seams</li>
</ul>

Welding & Cut Protection Glove Supreme Heat

Flame resistant wide braces with heavy-duty elastic and robust metal clips. Easy to adjust for a perfect fit. The straps are tested in accordance with EN ISO 11612 – Protection against heat and flame.

Flame resistant braces

Detachable and flame-resistant tool pockets in a thin and flexible material, now in quality 1512. Fit Blåkläder's trousers without tool pockets in quality 1512. Used together with belt 4039.

Flame resistant tool pockets belt fastening

Flame resistant tool pockets to fit 1478, 1578, 2608, 2678, 6378, 1869 and 1724. Use with flame resistant belt 4039.

Flame resistant tool pockets to fit 1561, 2861, 6061. Used with belt 4039.

Protects the throat and neck from wind and draughts. Can be used as a hat, sweat band, balaclava etc. Thanks to the comfortable, flame-resistant material, it provides permanent protection against e.g. heat, flame and electric arc.  The garment is certified to EN ISO 14116, EN 1149-5. Quality 1764 is tested and approved according to APC 1 and has an ELIM value of 7.3 cal/cm².

Flame resistant collar/bandana

Balaclava which, thanks to its comfortable, flame-resistant material, provides permanent protection against heat, flame and electric arc. Soft stretch material provides high work comfort when working in hazardous environments.  The garment is certified to EN ISO 14116, EN 1149-5. Quality 1764 is tested and approved according to APC 1 and has an ELIM value of 7.3 cal/cm².

Balaclava Inherent

Neck protection with inherent flame retardant in sweatshirt quality. Due to the high demand, Blåkläder has developed this neckline because its double layers at one end protects the neck and face particularly well. 
Can be used both as a hat or neck cover and can be pulled up as a face protection when needed. 
The garment is certified according to EN 14116 index 3, EN 1149-5 and the material has an ELIM-value of 8,6 cal/cm².

Inherent Neck protection

This flame-resistant hood (balaclava) protects your head, face and neck. Suitable to wear underneath the helmet and gives the wearer good face protection. The garment is certified according to EN 14116 and EN 1149-5. ELIM 8,6 cal/cm².

A thin, flexible and inherent flame resistant wool beanie that can be worn under a helmet. It has excellent abilities for providing and retaining heat. 
It is certified according to EN ISO 14116. EN 1149-5.

Wool beanie Inherent

Elasticised welding hat, available in four sizes. The hat protects against dirt and can readily be worn under a welding helmet. Also excellent corporate profiling potential. 
Certified to EN ISO 14116, EN 1149-5.

Accessories

Hood Inherent

Welding Glove Supreme Heat TIG

Welding Glove Supreme Heat MIG

Welding & Heat Protection Glove Supreme Heat MAG

Welding & Cut Protection Glove Supreme Heat

Flame resistant braces

Flame resistant tool pockets belt fastening

Flame resistant tool pockets belt fastening

Flame resistant tool pockets belt fastening

Flame resistant collar/bandana

Balaclava Inherent

Inherent Neck protection

Balaclava Inherent

Wool beanie Inherent

Welding cap