Collections

Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Cut protection level

Environment of use

Fitting Shoes

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

NEW COLOUR!

Quality 1512 is an inherent fabric which means that the flame retardant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Comfortable and stretchy rib quality, with inherent flame resistant properties. Fabric is certified for EN 11612 A1, B1, C1, EN 1149-3, EN IEC 61482-1-1 Ebt: 8,2 cal/cm² ELIM: 7,3 cal/cm², EN IEC 61482-1-2, APC 1.

A comfortable sweatshirt fabric in modacrylic- and cotton mix with best protection. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Comfortable and flexible single jersey with inherent flame resistant properties. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

A knitted material with inherent flame resistant features. It's an interlock that is soft and comfortable to wear. The fabric is certified for EN ISO 20471, EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Polyuretan coated (PU) polyester, wind- and waterproof fabric with breathable function. 

Flame resistant PVC material that is wind-and waterproof. The fabric is certified for EN 1149-3, EN ISO 14116 Index 3, EN ISO 61482-1-2 class 1, EN 343 class 4,1, EN ISO 20471.

Quality 1516 is a flame-retardant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1514 is a flame retardant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN  IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1513 is an inherent fabric which means that the flame retardant properties are built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471. 

Soft, supple, comfortable trousers optimized for environments that require strong protection combined with high user comfort. The trousers are made from an oil-, dirt- and water-repellent material.
This garment is metal free, and has plastic buttons and zip. Raised back section with elastic in the side waist for enhanced comfort. Bellowed leg pockets with flaps, internal ID card holder. The trousers have two back pockets with press-studded flaps.
Pre-bent knees with external knee pockets that open from below. Ankle width adjusts with press studs. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Inherent Trousers

Metal-free craftsman trousers for use in areas that require flexibility and good protection. The trousers offer high comfort and sewn-on holster pockets. Raised rear waist section with elastic in the sides for enhanced comfort. Bellowed leg pockets, the left with an ID card holder, and two back pockets with press studs.
Pre-bent knees with external knee pockets that open from below. Ankle width adjusts with press studs. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Craftsman Inherent Trousers

Trousers made from a soft, supple, durable material, with a thin lining inside the front. In the lined areas, the trousers are approved to the higher arc flash protection class, APC 2. One bellowed leg pocket with flap, interior ID card holder and phone holder on the left side, a bellowed ruler pocket with flap on the right.
The trousers have two back pockets with press-studded flaps. This is a metal-free garment with plastic press studs and zip.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 (APC 2 where lined), EN 13034.

APC 2 Inherent Trousers

Trousers made from a soft, supple, durable material, with a thin lining inside the front. In the lined areas, the trousers are approved to the higher arc flash protection class, APC 2.
Many smart pocket solutions that comply with the certification requirements. This is a metal-free garment with plastic press studs and zip.
Certified to EN ISO 20471, EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 (APC 2 where lined), EN 13034.

APC 2 Multinorm Inherent Trousers

Boxer shorts which, thanks to their comfortable, flame-resistant material, provide permanent protection against heat, flame and electric arc.
The garment is certified to EN ISO 14116, EN 1149-5.

Multinorm briefs

Our flame-resistant long johns in comfortable, flame-resistant material, providing permanent protection against e.g. heat, flame and electric arc.
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Multinorm Long Johns

Protects the throat and neck from wind and draughts. Can be used as a hat, sweat band, balaclava etc. Thanks to the comfortable, flame-resistant material, it provides permanent protection against e.g. heat, flame and electric arc.
The garment is certified to EN ISO 14116, EN 1149-5.

Multinorm collar/bandana

Balaclava which, thanks to its comfortable, flame-resistant material, provides permanent protection against heat, flame and electric arc. Soft stretch material provides high work comfort when working in hazardous environments.
The garment is certified to EN ISO 14116, EN 1149-5.

Multinorm balaclava

Bib trousers in a soft, comfortable quality offering high durability. The trousers have oil-, dirt- and water-repellent properties. Metal free with plastic buttons, zip and buckles.
Adjustable braces with elastic in the back, a button-adjustable waist, belt loops, pre-bent knees and external knee pockets that open from below, as well as ankle width that adjusts with buttons.
Functional pockets including a chest pocket, two front pockets, two back pockets with flaps, and leg pockets with an ID card holder on the left.
Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Inherent Bib Trousers

Oil-, dirt- and water-repellent sleeveless overalls that provide the right protection in tough environments.
These light, durable, comfortable and metal-free sleeveless overalls are made from an inherent material, and have stretch panels in the back for enhanced comfort and freedom of movement. The chest pockets can be detached at the bottom for working leaning forwards. Reinforced knee pad pockets that open from below.
Certified to EN 1149-5, EN 61482-2, EN ISO 11612, EN ISO 20471.

Inherent Sleeveless Overalls

Vest in a soft, supple material offering high durability. A popular model among installers and electricians who are used to carrying a lot of equipment. Several multifunctional pockets that help make day-to-day tasks easier.
The vest is metal free and has plastic press studs and zip. Heat-applied reflective details for enhanced visibility and loops around the waist designed for a belt that can relieve weight.

Inherent Vest

This sought-after flame-resistant and non-metal hi-vis sweatshirt is classified as class 2 in sizes XS–M and class 3 in size L and larger. One of the many advantages of this sweatshirt is that it can also be used as a jacket if needed.
The sweatshirt is equipped with segmented reflective transfers for increased visibility and safety. What’s more, it has a covered zipper at the front and side panels that give it an ergonomic fit. The sweatshirt has a comfortable quality with excellent protective properties.
In addition to protection, the sweatshirt is also practical as it’s equipped with two front pockets with zippers and a high collar that provides additional protection when turned up.
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612, EN ISO 20471. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Multinorm Sweatshirt with full Zip

Flame-resistant, non-metal hi-vis (class 1) sweatshirt which has the added benefit of functioning as a jacket. Featuring segmented reflective transfers, covered zipper at the front and side panels for increased ergonomic fit.
The sweatshirt has a nice quality with good protective values, two front pockets with zippers and a high collar that provides good protection when turned up. This is a sought-after product that is now available in Blåkläder’s range.
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612, EN ISO 20471, Class 1. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Multinorm sweatshirt with zip

Long-sleeved flame-resistant T-shirt in a thin quality that's really comfortable. Women's fit, rounded neck, reinforced seams in the shoulders and back of neck, and ribbed cuffs. Approved for washing at 60°C.
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Women’' Flame-Resistant T-Shirt Long Sleeves

Long-sleeved hi-vis T-shirt with flame resistance and diagonal reflective tape stripes. Women's fit, rounded neck, reinforced seams in the shoulders and back of neck.
Certified to EN ISO 20471, EN 1149-5, EN ISO 11612.

Women's Long-sleeved T-shirt Multinorm

Flame-resistant, non-metal hi-vis (class 2) sweatshirt which has the added benefit of functioning as a jacket. Featuring segmented reflective transfers, covered zipper at the front and side panels for increased ergonomic fit.
The sweatshirt has a nice quality with good protective values, two front pockets with zippers and a high collar that provides good protection when turned up.
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612, EN ISO 20471, Class 2. EBT: 13 cal/cm², ELIM: 12 cal/cm².

Women’s Multinorm Hi-Vis Sweatshirt Zip

Versatile and safety-certified hi-vis sweatshirt. This flame-resistant, non-metal sweatshirt in a women’s fit is classified as class 1 and has a number of a functional features. One of its benefits is its utility as both a sweatshirt and a jacket.
The sweatshirt is equipped with segmented reflective transfers that improve visibility and safety. What’s more, it has a practical covered zipper at the front and side panels that give it an ergonomic fit.
Manufactured in an attractive, high-quality material and offers excellent protection. The sweatshirt has two front pockets with zippers for practical storage and a high collar that provides additional protection when turned up.
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612, EN ISO 20471, Class 1. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Stylish, comfortable and very useful flame-resistant sweater with inherent quality with side panels for enhanced ergonomic fit. The sweater features embroidery clearly showing its flame-resistant credentials, crew neck and cleverly placed pocket in the side panel with room for a phone or other technical equipment.
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Flame resistant Sweater

Stylish, comfortable and very useful flame-resistant hoodie with inherent quality with side panels for enhanced ergonomic fit. Featuring a protective hood with an ingenious solution in the front that allows you to turn up the collar for increased protection when needed.
The hoodie features embroidery clearly showing its flame-resistant credentials. Concealed inner phone pocket.
Certified to EN 1149-5, EN 61482-2, APC 1, EN ISO 11612. EBT – 13 cal/cm², ELIM – 12 cal/cm².

Flame resistant Hoodie

A women's fit industrial jacket in a soft, supple, comfortable, highly durable quality. The metal-free (buttons and covered zips in plastic) jacket has oil-, dirt- and water-repellent properties. Hidden chest pocket with zip, two front pockets with flaps and press studs, and loops for a microphone, oximeter or other technical device.
Extended, width-adjustable back, and the cuff width is also adjustable using press studs. The collar can be closed with two press studs for extra protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Women's Inherent Jacket

An oil-, dirt- and water-repellent overshirt with enhanced visibility in a soft, supple quality, characterized by high comfort and durability. This women's fit garment is a functional cross between traditional industrial jacket and modern shirt.
It is completely metal free, and has plastic press studs and a plastic two-way zip. Covered, bellowed chest pockets with plenty of room for a mobile phone, note pad and other equipment. An exterior holder for e.g. a pen or glasses on the left side.
Holders for an oximeter, microphone or other technical device above each chest pocket. The collar has press studs on the front for extra protection when needed. Pre-bent sleeves and cuffs adjustable in two different widths with press studs.
Back hem extended for extra comfort. Heat-applied reflective details on shoulders, back and lower sleeves. Tested and approved for industrial washing - EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2.

Women's Inherent Overshirt

A metal-free industrial jacket in a soft, supple, comfortable quality. Highly durable and oil-, dirt- and water-repellent. Hidden chest pocket with zip, two front pockets with flaps, and loops at the yoke for a microphone, oximeter or other technical device.
Extended, adjustable back, and the cuff width is also adjustable using press studs. High collar for greater protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Inherent Jacket

An oil-, dirt- and water-repellent overshirt with enhanced visibility in a soft, supple quality, characterized by high comfort and durability. This garment is a functional cross between traditional industrial jacket and modern shirt.
It is completely metal free, and has plastic press studs and a plastic two-way zip. Covered, bellowed chest pockets with plenty of room for a mobile phone, note pad and other equipment. An exterior loop for e.g. a pen or glasses on the left side.
Holders for an oximeter, microphone or other technical device above each chest pocket. Collar raised at the back, with press studs in the front. Pre-bent sleeves and adjustable cuffs with press studs. Back hem extended for extra comfort. Heat-applied reflective details on shoulders, back and lower sleeves.
Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. Certified to EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2.

Inherent Overshirt

Jacket made from a soft, supple, durable material, with a thin inside lining. This combination means the jacket is approved for APC 2, the higher class for arc flash protection.
Hidden chest pocket with zip, two front pockets with flaps, and loops at the yoke for a microphone, oximeter or other technical device. Heat-applied reflective details for enhanced visibility. The jacket is metal free and has plastic press studs and zips.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 (APC 2), EN 13034.

APC 2 Inherent Jacket

Jacket made from a soft, supple, durable material, with a thin inside lining. This combination means the jacket is approved for APC 2, the higher class for arc flash protection. Smart pocket solutions such as double chest pockets with covered zips.
This is a metal-free garment with plastic components.
Certified to EN ISO 20471, EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 (APC 2), EN 13034.

APC 2 Multinorm Inherent Jacket

Undershirt with a high collar which, thanks to its comfortable, flame-resistant material, provides permanent protection against e.g. heat, flame and electric arc.
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Multinorm basic zip neck

Overalls in a soft, comfortable material offering high durability and oil-, dirt- and water-repellent properties. Metal free with plastic buttons and two-way zip.
A waist that adjusts from inside, several multifunctional pockets, and heat-applied reflective details in carefully selected places. External knee pockets that open externally. Both the cuffs and ankles can be adjusted using press studs.
Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Inherent Overall

Soft, supple, comfortable women's fit trousers optimized for environments that require strong protection combined with high user comfort. The trousers are made from an oil-, dirt- and water-repellent material. This garment is metal free, and has plastic buttons and zip.
Raised back section with elastic in the side waist for enhanced comfort. Bellowed leg pocket with flap, internal ID card holder. The trousers have two back pockets with press-studded flaps. Pre-bent knees with external knee pockets that open from below. Ankles adjustable with press studs to three different widths.
Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing - EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Women's Inherent Trousers

Women's fit craftsman trousers for use in areas that require good protection, along with flexible trousers offering high comfort and plenty of solutions for carrying equipment. These are metal-free trousers with plastic press studs and zip.
The waistband has a raised back section with elastic in the sides for enhanced comfort, and two fixed holster pockets with plenty of solutions for storing tools and small technical equipment and components. The holster pockets are reinforced with double fabric at the bottom. Bellowed leg pockets, the left with an ID card holder.
The trousers have two bellowed back pockets with press studs. Pre-bent knees with external knee pockets that open from below. Ankles adjustable with press studs to three different widths. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Women's Craftsman Inherent Trousers

Rain trousers in multinorm with braces and reinforced knees, making it a tough garment who can resist the most. Has welded seams. The drawstring at the waist allows the pants to be comfortable and the adjustable waistcoats prevent moisture from finding its way in. External pocket for folding rule.
Certified according to EN 343, EN 13034, EN ISO 20471, EN ISO 14116.

Flame resistant rain trousers

Flame-resistant rain trousers for you with tasks that require durable but at the same time flexible rainwear that you must also be visible in. The trousers are wind and waterproof with welded seams that do not allow any moisture to penetrate.
Good fit with wide elastic at the back, adjustable and detachable braces and adjustable leg ends with buttons and velcro. Leg pocket with bellows and lid, opening with lid for the possibility of hanging out nail pockets. Has transfer reflexes.
Certified according to EN 1149-5. EN ISO 20471. EN 343. EN ISO 14116. IEC 61482-2.

Flame resistant rain trousers Level 2

Flame resistant, long-lasting work trousers with a good fit. These oil, dirt and water-repellent trousers have functional details throughout, for example bent legs and reflective details at the bottom and spacious handling pockets with many functions. Internal knee pad pockets increase comfort when working on your knees.
Certified to EN 14404, EN 1149-5, EN ISO 11612, IEC 61482-2. ATPV: 16,0 cal/cm².

Flame resistant craftsman trousers

The Multinorm trouser provides you with the maximum protection when working in harsh environments. The oil, dirt and water-repellent garment is made from a durable material and features a comfortable fit and Cordura®/Kevlar®/Protal™-reinforced knee protection pockets with the possibility of two placement levels.
Functional pocket solutions for your tools and carefully considered details such as darker fabric where most exposed to dirt. Industrially washable. Protects against liquid chemicals.
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11,0 cal/cm².

Multinorm trousers

Oil, dirt and water-repellent multinorm craftsman trouser that offers you the ultimate protection when working in harsh environments.
An advanced craftsman's trouser with fixed nail pockets in durable material and reinforced knee protection pockets in Cordura®/Kevlar®/Protal™ with the possibility of two placement levels. Industrially washable.
Certified according to EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11,0 cal/cm².

Multinorm craftsman trousers

Flame resistant service trousers, ideal for maintenance work. Flexible and hard-wearing service trousers in inherent material with stretch sections, specifically suitable if you carry out maintenance work both indoors and outdoors in warmer temperatures.
These oil, dirt and water-repellent trousers have a narrower fit and stretch panels in the crotch, seat and knees giving them even more flexibility and movement.
Certified to EN 1149-5, EN ISO 11612, IEC 61482-2. ATPV: 10,7 cal/cm², HAF 72,5% (regarding the stretch material).

Flame resistant inherent trousers with stretch

Oil, dirt and water-repellent flame resistant trousers with stretch function. The ideal work trousers with a high level of comfort for people who work in exposed environments. Fitted with smart details such as stretch panels for increased freedom of movement and flexibility.
The fabric is inherent with high wear resistance. CORDURA®/Kevlar®/Protal®- reinforcement on the knees, folding ruler and knife pocket with space for a phone. Specifically suitable for jobs such as an electrician and similar categories of work.
Certified to EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2.

Multinorm Inherent trousers with stretch

Oil, dirt and water-repellent trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres.
The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees. They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life.
Ripstop fabric delivers exceptional tear strength. Tested and approved for 50 washes.
Certified under EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11 cal/cm², HAF: 79,3%, LOI: 29,6%. Together with jacket 4089, class 3 is achieved according to EN ISO 20471. Tested for industrial washing EN ISO 15797.

Multinorm Inherent trousers

Trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres. The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees.
They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. Ripstop fabric delivers exceptional tear strength.
Certified under EN 1149-5, EN 13034 PB [6], EN ISO 20471, Class 1. When combined with 4089 XS-S, they achieve Class 3 certification under EN ISO 20471. EN ISO 11611, Class 1 A1+A2, EN ISO 11612 A1, A2, B1, C1, E1, F1, IEC 61482-2, Class 1. ATPV: 11.9cal/cm², HAF: 79.3%, LOI: 29.6%.

Multinorm inherent trousers

Oil, dirt and water-repellent trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres.
The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees. They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life.
The trousers have nail pockets, an open ruler pocket and flapless rear pockets. Ripstop fabric delivers exceptional tear strength. Tested and approved for 50 washes.
Certified under EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11 cal/cm², HAF: 79,3%, LOI: 29,6%.
Together with jacket 4089, class 3 is achieved according to EN ISO 20471. Tested for industrial washing EN ISO 15797.

Trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres. The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees.
They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. The trousers have nail pockets, an open ruler pocket and flapless rear pockets. Ripstop fabric delivers exceptional tear strength.
Certified under EN 1149-5, EN ISO 20471, Class 1.
When combined with 4089 XS-S, they achieve Class 3 certification under EN ISO 20471. EN ISO 11612 A1, B1, C1, E1, F1, IEC 61482-2, Class 1. ATPV: 11.9cal/cm², HAF: 79.3%, LOI: 29.6%.

Detachable and flame-resistant nail pockets in a thin and flexible material, now in quality 1512. Fit Blåkläder's trousers without nail pockets in quality 1512. Used together with belt 4039.

Flame resistant nail pockets

Flame resistant nail pocket to fit 1478, 1578, 2608, 2678, 6378, 1869 and 1724. Use with anti-flame belt 4039.

Flame resistant detachable nail pocket

Flame resistant nail pockets to fit 1561, 2861, 6061. Used with belt 4039.

Loose nail pockets

Oil, dirt and water-repellent anti-flame trousers with pre-bent knees and flexible, practical pockets, such as knee pad pockets at two different heights.
The legs feature reflective details for increased visibility. Industrially washable. The fabric has an arc rating of EN 61482-1-1 ATPV 8,2 cal/cm².
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, IEC 61482-2. ATPV: 16,0 cal/cm².

Anti-Flame Trousers

Oil, dirt and water-repellent multinorm craftsman trouser that offers you the ultimate protection when working in harsh environments.
An advanced craftsman trouser in a durable material with smart pocket solutions and reinforced Cordura®/Kevlar®/Protal™ knee protection pockets with the possibility of two placement levels. Industrially washable. Protects against liquid chemicals.
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11,0 cal/cm².

Multinorm Craftsman Trousers

Oil, dirt and water-repellent multinorm craftsman trouser offers you the ultimate protection when working in harsh environments.
An advanced craftsman's trouser with fixed nail pockets in durable material and Cordura®/Kevlar®/Protal™-reinforced knee pad pockets. Industrially washable.
Certified according to EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11,0 cal/cm².

Flame retardant craftsman trousers for maintenance work in exposed environments. These oil, dirt and water-repellent trousers meet all the requirements for a tough work clothes, designed for maintenance work requirement safety and protection.
They have spacious hanging pockets to fit tools and practical external knee pad pockets with CORDURA®/Kevlar®/Protal®-reinforcement.
Certified to EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2. Arc rating, 10.7 cal/cm² (applies to the stretch material).

Multinorm inherent trousers with stretch

Oil, dirt and water-repellent trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres. The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees.
They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. Ripstop fabric delivers top-class non-rip durability. Tested and approved for 50 washes.
The product is certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11 cal/cm², HAF: 79,3%, LOI: 29,6%.
Achieves Class 3 certification when combined with jacket 4089 under the EN ISO 20471 standard. Tested to meet the EN ISO 15797 requirements for industrial laundering.

Trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres. The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees.
They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. Ripstop fabric delivers exceptional tear strength.
Certified under EN 1149-5, EN 13034 PB [6]. EN ISO 20471, Class 2.
Together with art. 4089 XS-S obtains class 3 according to EN ISO 20471. EN ISO 11611, Class 1 A1+A2. EN ISO 11612 A1, A2, B1, C1, E1, F1. IEC 61482-2, class 1. ATPV: 11,9 cal/cm², HAF: 79,3%, LOI: 29,6%.

Oil, dirt and water-repellent trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres. The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees.
They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. The trousers have nail pockets, an open ruler pocket and flapless rear pockets. Ripstop fabric delivers top-class non-rip durability. Tested and approved for 50 washes.
The product is certified according to EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11 cal/cm², HAF: 79,3%, LOI: 29,6%.
Achieves Class 3 certification when combined with jacket 4089 under the EN ISO 20471 standard. Tested to meet the EN ISO 15797 requirements for industrial laundering.

14171512

Inherent Trousers

14181512

Craftsman Inherent Trousers

14271512

APC 2 Inherent Trousers

14911512

APC 2 Multinorm Inherent Trousers

18281764

Multinorm briefs

18981764

Multinorm Long Johns

20361764

Multinorm collar/bandana

20381764

Multinorm balaclava

26171512

Inherent Bib Trousers

28871512

Inherent Sleeveless Overalls