Colour

Certification

Collections

Function

Lining

Material

Sustainability Label

Type of garment

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

NEW COLOUR!

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Stretchy, comfortable and compliant grid fleece, structure that creates the best combination between warmth, insulation and breathability.

Wind- and waterproof fabric with breathable function and stretch effect.

Inherently flame resistant material that is wind and waterproof with breathability. The material is certified according to: EN ISO 11611, EN ISO 11612, EN ISO 1149, EN 61482-1-2, EN 61482-1-1, EN ISO 20471, EN 13034, EN 343.

Cordura fabric. Extreme durability with high abrasion resistance.

Detachable and flame-resistant tool pockets in a thin and flexible material, now in quality 1512. Fit Blåkläder's trousers without tool pockets in quality 1512. Used together with belt 4039.

Flame resistant tool pockets belt fastening

Flexible and warming beanie with a back opening, for those with ponytails who want to keep hair out of the way during work. Grid-structured material provides warmth and moisture management, suitable for both standalone wear or under a helmet or hood.

Beanie Ponytail

Versatile balaclava made from grid-structured fabric that offers insulation while effectively venting moisture. The material is soft against the skin and flexible, making it suitable to wear as a full hood or folded down as a neck warmer. Easy to adjust and quick to wash and dry. 
Designed to function well under helmets, hoods, or other headgear.

Balaclava

Functional headband in grid-structured material that provides insulation and efficient moisture transport. Covers the ears and keeps hair in place. The stretch material fits comfortably, is easy to wash and dries quickly. 
A smart alternative when a beanie is too warm, but you still need protection from cold and wind.

Headband

This strap is designed for the Blåkläder ToolRig™ system and lets you position a standard hammer holder exactly where you want it. Attach the holder, clip it onto the rail – done. The hook-and-loop fastening makes mounting quick, simple and flexible, with no belt needed.

ToolRig™ Hammer Holder Strap

A hi-vis hood in windproof and waterproof material designed to be worn over a beanie. Fits a range of jackets, men’s and women’s, from lighter shells to winter jackets, for example 4760, 4435 and 4455. Not designed to be worn over a helmet.

Hi-Vis Hood

Flame-resistant hood for shell jacket 4446, featuring reflective details for increased visibility. Completely metal-free and attaches with plastic press studs.
<ul>
<li>Size S fits model 4446 in sizes XS–S</li>
<li>Size L fits model 4446 in sizes M–XL</li>
<li>Size 2XL fits model 4446 in sizes 2XL–4XL</li>
</ul>

Flame-Resistant Hood

Slim and nimble yet roomy enough for today’s essential tools and consumables. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
Inside you’ll find a larger zipped main compartment, then an open compartment for materials such as screws, plugs or nails. The three outer compartments organise screwdrivers and small tools for instant access. External straps make it easy to attach a knife and extra accessories.
Supplied with ToolRig™ slider + lockable slider.

ToolRig™ Tool Pocket

Slim and nimble yet roomy enough for today’s essential tools and consumables. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The pocket features an inner, larger main compartment and a slightly smaller outer compartment – both with zips. 
Supplied with ToolRig™ slider + lockable slider.

ToolRig™ Nail & Screw Pocket

Your stable base when the load gets heavy. This tool belt uses the same ToolRig™ rail as our work trousers, so you can move pockets and accessories to where they work best. The padded waist reduces pressure, the quick-release buckle makes on/off easy and the adjustable length gives a precise fit even over outerwear. For maximum ergonomics, pair with the ToolRig™ Harness (2521) or ToolRig™ Braces (2522).

ToolRig™ Tool Belt

Pairs with the ToolRig™ Tool Belt to distribute weight comfortably across the shoulders. Padded shoulders add comfort when the tool load grows. Lockable hooks connect securely to both the ToolRig™ tool belt and ToolRig™ trousers. Adjust the length and attach your tools to the shoulder straps – stable, ergonomic and ready for long shifts.

ToolRig™ Harness

Clip on to ToolRig™ trousers or the ToolRig™ Tool Belt to ease the load when gear gets heavy while keeping trousers in place. Wide, strong straps distribute weight evenly and the lockable metal hooks fasten securely to both belt and trousers. 
Lightly padded shoulders add comfort and length adjusts in seconds. A smart solution when you want relief without going all the way to a harness.

ToolRig™ Braces

A tough tool bag that keeps your gear organised. Carry by the handle or on the shoulder. The open, stable construction gives instant overview and fast access to everything you need. 
Whatever you bring, there are strategically placed compartments and straps for it. On both sides you’ll find Blåkläder ToolRig™ panels with four ToolRig™ mounts per side, so you can click on the tool pockets that fit the task and bring your entire rig with you. 
The construction is stable and sturdy – built to stand up, stand steady and stand the test of time.

ToolRig™ Tool Bag

Developed with the carpenter in mind, yet just as useful for any trade that wants order and overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The construction is robust and shape-stable so openings stay open and accessible. 
Dedicated compartments for a ruler and speed square. Then four inner compartments and three outer, slightly lower ones to keep tools and small parts in place. External straps let you attach additional accessories.

ToolRig™ Carpenter Pouch

Developed with the electrician in mind, yet just as useful for any trade that wants order and overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The build is robust and shape-stable, keeping openings open for clear visibility and fast access. 
Inside are six slim compartments to hold screwdrivers securely and within easy reach. Further out are three lower compartments that support quick access to pliers and similar tools. External straps let you attach additional accessories.

ACCESSORIES FOR THE BLÅKLÄDER ASSORTMENT